Mock-Up Support Easy-Fix-System 






The Easy-Fix System components

Characteristics 


  • The additional clamping device allows fixing of non-articulated models and occlusal antagonists
  • Intelligently refined capturing concept with a magnetic backing
    plate and flexible support pins for central positioning of all
    models in the Scanner S600 ARTI
  • Fixing of smaller models with the aid of a clamping claw
  • Firmly attached mock-up support basis with easily removable
    magnetic model backing plate
  • The Multi-Die Holder makes it possible to scan multiple dies from the upper and the lower jaw at the same time and subsequently assign them freely in the software

Mock-Up Support Easy-Fix-System 




Positioning plate + Easy-Fix Model holder

For quick and simple capturing of all common models in the Scanner S600 ARTI, Zirkonzahn now offers a new solution:
The Easy-Fix Model Holder.
Due to the flexible holding pins of the Easy-Fix Model Holder, models can be fixed in no time without time-consuming unscrewing and resealing. The models can simply be clamped into the holder.








Positioning plate + Easy-Fix model holder + Model fixing pin

In order to be able to scan the models in occlusion, also the antagonist can be clamped without problems using the Easy-Fix Model Fixing Pin.








Positioning plate + Easy-Fix Model holder + Clamping claw

The Easy-Fix Model Holder has been designed in such a way that it can be upgraded anytime and is therefore also prepared for future developments. Due to the positive response to the Easy-Fix Model Holder from the part of the dental technicians, the first upgrades were not long in coming: using the Easy-Fix Clamping Claw even the fixing of smaller models (e.g.) half models is no longer a problem.








Positioning plate + Easy-Fix model holder + Clamping claw + Model fixing pin

To scan the models in occlusion, use the clamping fixture Easy-Fix Model Fixing Pin to clamp the antagonist.







Additional components


The Easy-Fix Model Holder is magnetically fixed onto a firmly anchored carrier plate and can hence be removed in a fast and easy way.
Using the magnetic carrier plate of the Easy-Fix System, different additional components can be added and applied in the most simple way.





Positioning plate + Model Position detector

The Model Position Detector allows digital capturing of height, position and alignment of models in the Scanner S600 ARTI. The software automatically brings model and antagonist into the correct position. Then the fine adjustment can be performed manually, using the fine adjustment function in the software. When making subsequent modifications, it is no longer necessary to scan the antagonist again.
The position of the Split-Cast System can be regulated in the Model Position Detector in a way to fit also unfavourably articulated models.








Positioning plate + Multi-die holder

Another attractive component of the Easy-Fix System is the Multi-Die Holder, which is used for simultaneous scanning of multiple single dies. With the Multi-Die Holder it is possible to scan closely positioned dies in one single scanning step – a process which would normally require two scans. The single dies are fixed in the Multi-Die Holder with modelling clay, before being freely assigned in the software. In this way, even upper and lower jaw dies can be scanned simultaneously.







Components

Positioning plate
Quick and simple fixing of models in the Scanner S600 ARTI
Package content: 1 piece

Item number: ZBAC2211
New Mock-up support Easy-Fix
Quick and simple fixing of models

Item number: ZBAC2241
New Magnetic model backing plate Easy-Fix
Quick and simple fixing of models
Package content: 1 piece

Item number: ZBAC2231
New Model fixing pin Easy-Fix
Quick and simple fixing of models
Package content: 1 piece

Item number: ZBAC2221
New Clamping Claw Easy-Fix
Clamping claw for fixing of smaller models in the model support Easy-Fix
Package content: 1 piece

Item number: ZBAC2251
Model Position Detector
For automatic positional measuring of models in the Scanner S600 ARTI
Package content: 1 piece

Item number: ZBAC2201

Reference marker Model Position Detector
Replacement part for the Model Position Detector
Package content: 1 piece

Item number: ZBAC0825
Self-adhesive label for reference marker Model Position Detector
Package content: 25 pieces

Item number: ERAA6801

New Multi-Die Holder
Holding device for simultaneous scanning of several single dies (also upper and lower jaw dies can be scanned simultaneously)
Package content: 1 piece

Item number: ZBAC2301