NEWZirkonzahn.CAM High-Speed



With the new Zirkonzahn.CAM High-Speed module in the Zirkonzahn.Nesting software, we have significantly reduced not only calculation and nesting times but also the milling processes for dental restorations made from soft materials. For example, a complete denture (with upper and lower bases and teeth) can be milled in just approximately 2 hours and 20 minutes.

This cutting-edge technology boosts productivity while ensuring the highest level of precision, enabling our customers to work faster – without compromising quality standards.
 

Comparison between Zirkonzahn.CAM and Zirkonzahn.CAM High-Speed


 
Calculation and nesting
MM:SS*
Milling time
HH:MM:SS
Crown
(zirconia)
 
01:50
 
- 91 %
00:10
 
19:20
 
- 44 %
10:50
Crown
(resin)
 
01:30
 
- 89 %
00:10
 
12:50
 
- 55 %
05:50
Bridge
(zirconia)
 
02:10
 
- 77 %
00:30
 
39:00
 
- 51 %
19:00
Bridge
(resin)
 
01:50
 
- 82 %
00:20
 
22:50
 
- 46 %
12:20
Denture teeth
(resin)
 
05:40
 
- 74 %
01:30
 
01:51:00
 
- 71 %
32:00
Denture base
(resin)
 
05:20
 
- 59 %
02:10
 
02:09:00
 
- 60 %
51:40
Bite splint
(resin)
 
05:00
 
- 53 %
02:20
 
02:17:00
 
- 70 %
40:50
Z
Zirkonzahn.CAM
HS
Zirkonzahn.CAM High-Speed
*The values vary depending on the processing power of the PC used.
 
 

Minimum requirements for using Zirkonzahn.CAM High-Speed

Nesting PC:
  • Windows 11 with 32 GB of RAM
  • Current NVIDIA graphics card with the latest driver

Software:
  • Zirkonzahn.Modellier software, version 9545 or higher
  • Zirkonzahn.Nesting software, version 9094 or higher
  • Zirkonzahn.Fräsen software, version 4006_0040 or higher

Milling unit:
  • Compatible with the M1 Wet Heavy Metal milling unit, the M2 Comfort Line, the M4 Wet Heavy Metal and the M6 Teleskoper Blank Changer milling units.
  • Chuck with Ø 6 mm
  • CAD/CAM milling bur 2,5 R PMMA (item number: FR6030) for the milling of resin