новыйMulti Blank Holder
7 crowns – 7 colours – 7 patients
The new Multi Blank Holder 4x1 and Multi Blank Holder 7x1 Teleskoper are special holders for processing 1-size blanks in different colours and heights. The Multi Blank Holder 4x1 can be used in all milling units with an orbit diameter of 95 mm. In combination with the 2-Blank-Plate and the 4-Blank-Plate it can also be used in the M4 Wet Heavy Metal milling unit. The Multi Blank Holder 7x1 Teleskoper was specifically developed for the Teleskoper Orbit ⌀ 125 mm of the M2 milling unit comfort line.
 |
 |
|
| Multi Blank Holder 4x1 | Multi Blank Holder 7x1 Teleskoper |
| The Multi Blank Holder is particularly advantageous: in just one milling process it allows to produce seven single crowns in little-used tooth shades. In this way, it is possible to produce crowns for 7 different patients all at once. Thanks to the smaller blank shape, it is no longer necessary to keep a large inventory of hardly used colours. For the Multi Blank Holder, 1-size material blanks are available in Prettau® Dispersive® zirconia in the heights of 16 mm and 22 mm. | ||
 |
||
 |
PRETTAU® 2 Dispersive® Particularly high translucent and flexural strenght zirconia with natural colour gradient. Suitable for single crowns (monolithic or reduced restorations for ceramic layering). |
||
 |
PRETTAU® 3 Dispersive® Zirconia with particularly high translucency, flexural strength and Gradual-Triplex-Technology: a triple gradient of natural colour, flexural strength and translucency. Suitable for single crowns (monolithic or reduced restorations for ceramic layering). |
||
Easy to use
 |
 |
|
| In the Multi Blank Holders it is possible to insert only mini blanks (size 1) in Prettau® Dispersive® zirconia (1H16, 1H22). The mini zirconia blanks (size 1) developed for the manual system cannot be processed with the Multi Blank Holders. | ||
Instructions
 |
 |
Instruction Multi Blank Holder 4x1 |
||
 |
|
Instruction Multi Blank Holder 7x1 Teleskoper |
Multi Blank Holder
 |
 |
|
| новый! Set Multi Blank Holder 4x1 Holder for fixing and for the serial processing of up to four size 1 material blanks in the Zirkonzahn milling unit with orbit ⌀ 95 mm. содержание: 1x holder for up to four size 1 material blanks with a height of 16 mm, 1x attachment disk to heighten the holder for the size 1 material blanks with a height of 22 mm, 4x fixing screws, 1x rotating spanner for tightening the fixing screws товарный номер: ZBAC2860 |
новый! Set Multi Blank Holder 7x1 Teleskoper Holder for fixing and for the serial processing of up to seven size 1 material blanks in the Zirkonzahn milling unit with orbit ⌀ 125 mm. содержание: 1x holder for up to seven size 1 material blanks with a height of 16 mm, 1x attachment disk to heighten the holder for the size 1 material blanks with a height of 22 mm, 7x fixing screws, 1x rotating spanner for tightening the fixing screws товарный номер: ZBAC2880 |
