The zirconia for restorations without veneering

---

Prettau^® Zirconia is the material of choice for frequently occurring problems like reduced available space, bruxism or ceramic chipping. It offers a functional and at the same time aesthetical solution.

This, highly biocompatible and non-porous material distinguishes itself through its extremely high translucency and perfectly natural appearance. Due to these characteristics and if used in conjunction with a special colouring technique, the use of veneer ceramics can be entirely eliminated. In this way, aesthetically pleasing full-zirconia restorations, i.e. the Prettau^® Bridge can be realized.
 

Range of applications 

---

 

• Partial and single crowns
• Inlays, onlays and veneers
• Bridges with up to 14 elements (occlusally screwed or cemented)
• All indications can be manufactured fully anatomically or reduced for veneering with ceramics

 

Characteristics

---

Prettau® Zirconia is partially stabilized with yttrium and enriched with aluminium. This results in positive material properties like a high bending strength of up to 1,200 MPa, a high temperature resistance, as well as a constant shrinking factor granting the highest possible precision.   Higher translucency due to optimized microstructure of the zirconia No ceramic chipping No abrasion to the antagonist tooth 200% higher bending strength, thanks to the elimination of the veneer ceramics Especially suited in case of implants, reduced available space or restorations with gingival reconstruction

Material composition 

---

Zirconia is the result of a chemical process: the basis is zirconia sand, partially stabilized with yttrium and made into Zirconia blanks through a mechanical process. Among the dental ceramics available today, zirconium oxide is without any doubt the material with the highest flexural and tensile strength.

By omitting the ceramic layering, a more massive structure can be created, resulting in an overall higher resistance of over 200%. In this way, ceramic chipping and abrasion to the antagonist are being avoided.

Abrasion behaviour 

---

Compared to polished zirconia, a tooth veneered with ceramics is 10,000 times more abrasive. The porous structure of the layered ceramic acts like sandpaper and causes wear on natural dentition.

This phenomenon can be illustrated using a practical example:
Rubbing our hands together creates abrasion, which can cause open skin areas. Rubbing our hands against a window pane makes the hand slip on the glass surface. This causes a minimal friction and heat, but no abrasion. Something similar is happening when sintered zirconia meets the natural tooth.
Zirconia in sintered state is perfectly smooth and non-porous, so that it slips on the natural tooth without friction, same as a hand on a window pane.

In general we can say:
The harder and smoother the material, the lower is the material wear caused by friction and hence also abrasion.


 

Schematic view of the abrasion in the indenter according to each sample

Processing 

---

Teeth are modelled and milled as usual, but then coloured with the special Colour Liquid and sintered in the sintering furnace with a specially elaborated program.
The technical know-how of the dental technician is now transferred from the layering technique to the colouring technique. The occlusal surface no longer needs to be tediously layered with ceramics, but can simply be copied from the completely modelled tooth.

 

указа́ние Colour Liquid Prettau® (Английский)

указа́ние Colour Liquid Prettau® Aquarell (Английский)

 

Cementation 

---

 
   
   
 
 

Comparison of the characteristics 

---

_________________	_________________	_________________	_________________	_________________	_________________
PRETTAU®	PRETTAU®	PRETTAU®	PRETTAU®	PRETTAU®	PRETTAU®
	2	2	3	4	4
		DISPERSIVE®	DISPERSIVE®	ANTERIOR®	ANTERIOR® DISPERSIVE®
_________________	_________________	_________________	_________________	_________________	_________________
Translucency	Translucency	Translucency	Translucency	Translucency	Translucency
_________________	_________________	_________________	_________________	_________________	_________________
Flexural strength	Flexural strength	Flexural strength	Flexural strength	Flexural strength	Flexural strength
_________________	_________________	_________________	_________________	_________________	_________________
			Gradual-Triplex-Technology*
Without colour gradient	Without colour gradient	With colour gradient	With colour gradient	Without colour gradient	With colour gradient
Without flexural strength gradient	Without flexural strength gradient	Without flexural strength gradient	With flexural strength gradient	Without flexural strength gradient	Without flexural strength gradient
Without translucency gradient	Without translucency gradient	Without translucency gradient	With translucency gradient	Without translucency gradient	Without translucency gradient
_________________	_________________	_________________	_________________	_________________	_________________
Individual colouring with Colour Liquids	Individual colouring with Colour Liquids	Optional: Individualisation with Colour Liquid Intensiv	Optional: Individualisation with Colour Liquid Intensiv	Individual colouring with Colour Liquids	Optional: Individualisation with Colour Liquid Intensiv
_________________	_________________	_________________	_________________	_________________	_________________
Sintering temperature	Sintering temperature	Sintering temperature	Sintering temperature	Sintering temperature	Sintering temperature
1600 °C	1600 °C	1600 °C	1500 °C	1500 °C	1500 °C
_________________	_________________	_________________	_________________	_________________	_________________
Monolithic design in the posterior area possible	Monolithic design in the anterior area and in the posterior area possible	Monolithic design in the anterior area and in the posterior area possible	Monolithic design in the anterior area and in the posterior area possible	Monolithic design in the anterior area and in the posterior area possible	Monolithic design in the anterior area and in the posterior area possible
_________________	_________________	_________________	_________________	_________________	_________________
*Gradual-Triplex-Technology: The zirconia is already provided with colour, translucency and flexural strength gradients during the production process. This results in a natural colouring, a highly translucent cutting edge and an extremely high flexural strength at the tooth neck.

 

Indications:

---

PRETTAU®	PRETTAU®	PRETTAU®	PRETTAU®	PRETTAU®	PRETTAU®
	2	2	3	4	4
		DISPERSIVE®	DISPERSIVE®	ANTERIOR®	ANTERIOR® DISPERSIVE®
_________________	_________________	_________________	_________________	_________________	_________________
Copings	Copings	Copings	Copings	Copings	Copings
_________________	_________________	_________________	_________________	_________________	_________________
Inlay, Onlay, Veneer	Inlay, Onlay, Veneer	Inlay, Onlay, Veneer	Inlay, Onlay, Veneer	Inlay, Onlay, Veneer	Inlay, Onlay, Veneer
_________________	_________________	_________________	_________________	_________________	_________________
Crowns	Crowns	Crowns	Crowns	Crowns	Crowns
_________________	_________________	_________________	_________________	_________________	_________________
Max. three-unit bridges	Max. three-unit bridges	Max. three-unit bridges	Max. three-unit bridges	Max. three-unit bridges	Max. three-unit bridges
_________________	_________________	_________________	_________________	_________________	_________________
Multiple-unit bridge	Multiple-unit bridge	Multiple-unit bridge	Multiple-unit bridge
			(bar-supported)
_________________	_________________	_________________	_________________	_________________	_________________
Circular bridges	Circular bridges	Circular bridges	Circular bridges
			(bar-supported)

ИССЛЕДОВАНИЯ 

---

Prettau^® 

---



Диоксид циркония Prettau® для Zirkonzahn Zirkograph 

---