Mock-Up Support Easy-Fix-System 




 
The Easy-Fix System components

Characteristics 

  • The Easy-Fix model holder has been designed for possible upgrades at any time and is therefore equipped for future developments.
  • The Model Position Detector allows digital capturing of height, position and alignment of models in the scanner. The software automatically brings model and antagonist into the correct position. Then the fine adjustment can be perfomed additionally, using the Fine-Adjustment function in the software.
  • Due to the flexible holding pins of the Easy-Fix model holder, models can be fixed in the scanner in no time without time-consuming screwing and unscrewing. The models can simply be clamped into the holder and scanned.
  • The Easy-Fix Clamping Claw permits the fixing of smaller models (e.g. half models).
  • With the Multi-Die Holder, dies that are close to each other and that normally would require two scans can be scanned
    in a single scan process.
  • The Transfer Fork Face Hunter can be fixed in the scanner via the Easy-Fix holder and the Multi Marker Plate, allowing 3D face scans to be matched in the software with model scans.

Mock-Up Support Easy-Fix-System 



Positioning plate + Easy-Fix Model holder

For easy and fast recognition of all common models in the Scanner S600 ARTI, Zirkonzahn now offers a new solution:
The Easy-Fix Model Holder.
Due to the flexible holding pins of the Easy-Fix Model Holder, models can be fixed in no time without time-consuming unscrewing and resealing. The models can simply be clamped into the holder.








Positioning plate + Easy-Fix model holder + Model fixing pin

In order to be able to scan the models in occlusion, also the antagonist can be clamped without problems using the Easy-Fix Model Fixing Pin.








Positioning plate + Easy-Fix Model holder + Clamping claw

The Easy-Fix Model Holder has been designed in such a way that it can be upgraded anytime and is therefore also prepared for future developments. Due to the positive response to the Easy-Fix Model Holder from the part of the dental technicians, the first upgrades were not long in coming: using the Easy-Fix Clamping Claw even the fixing of smaller models (e.g.) half models is no longer a problem.








Positioning plate + Easy-Fix model holder + Clamping claw + Model fixing pin

To scan the models in occlusion, use the clamping fixture Easy-Fix Model Fixing Pin to clamp the antagonist.







Additional components

The Easy-Fix Model Holder is magnetically fixed onto a firmly anchored carrier plate and can hence be removed in a fast and easy way.
Using the magnetic carrier plate of the Easy-Fix System, different additional components can be added and applied in the most simple way.





Positioning plate + Model Position detector

The Model Position Detector allows digital capturing of height, position and alignment of models in the Scanner S600 ARTI. The software automatically brings model and antagonist into the correct position. Then the fine adjustment can be performed manually, using the fine adjustment function in the software. When making subsequent modifications, it is no longer necessary to scan the antagonist again.
The position of the Split-Cast System can be regulated in the Model Position Detector in a way to fit also unfavourably articulated models.








Positioning plate + Multi-die holder

Another attractive component of the Easy-Fix System is the Multi-Die Holder, which is used for simultaneous scanning of multiple single dies. With the Multi-Die Holder it is possible to scan closely positioned dies in one single scanning step – a process which would normally require two scans. The single dies are fixed in the Multi-Die Holder with modelling clay, before being freely assigned in the software. In this way, even upper and lower jaw dies can be scanned simultaneously.







Components
Positioning plate
Quick and simple fixing of models in the Scanner S600 ARTI
Conteúdo da embalagem: 1 piece

Número do produto: ZBAC2211
Novo Mock-up support Easy-Fix
Quick and simple fixing of models

Número do produto: ZBAC2241
Novo Magnetic model backing plate Easy-Fix
Quick and simple fixing of models
Conteúdo da embalagem: 1 piece

Número do produto: ZBAC2231
Novo Model fixing pin Easy-Fix
Quick and simple fixing of models
Conteúdo da embalagem: 1 piece

Número do produto: ZBAC2221
Novo Clamping Claw Easy-Fix
Clamping claw for fixing of smaller models in the model support Easy-Fix
Conteúdo da embalagem: 1 piece

Número do produto: ZBAC2251
Model Position Detector
For automatic positional measuring of models in the Scanner S600 ARTI
Conteúdo da embalagem: 1 piece

Número do produto: ZBAC2201

Reference marker Model Position Detector
Replacement part for the Model Position Detector
Conteúdo da embalagem: 1 piece

Número do produto: ZBAC0825
Self-adhesive label for reference marker Model Position Detector
Conteúdo da embalagem: 25 pieces

Número do produto: ERAA6801

Novo Multi-Die Holder
Holding device for simultaneous scanning of several single dies (also upper and lower jaw dies can be scanned simultaneously)
Conteúdo da embalagem: 1 piece

Número do produto: ZBAC2301