NOVOMulti Unit Abutment angled
The Zirkonzahn Multi Unit Abutments Angled are available with a 17° angle to compensate for any inclinations of the implants and two differently angled hex-implant connections. They can be used for single and multi-unit restorations.
For the positioning of the Multi Unit Abutments, a sterilisable screw-in aid (Peek) is supplied. The abutments can be screwed onto the implant using the Ratched Wrench torque wrench and the MUA Screwdriver. Special MUA screws are available for this purpose.
 |
For single crowns and multi-unit restorations |  |
 |
Conical Cemented Titanium Base, Parallel Cemented Titanium Base and Parallel Cemented Titanium Base One Position as components of the Multi Unit Abutment Angled HEX. The One Position titanium bases are used to screw single crowns on Multi Unit Abutments 17° with anti-rotation device |
|
 |
With anti-rotation device | |
 |
Also available gold-plated for increased biocompatibility and reduced grey values | |
 |
Available in different heights |
Connection possibilites Multi Unit Abutment
Depending on the position of the implant, with the two different connection types (1 and 2) the number of connection possibilities has doubled.
| Side view | Top view | The MUA can be positioned on every 60° of a HEX connection. |
Having the possibility to choose between two different connection types, the MUA can be positioned on every 30° of a HEX connection. | |
| HEX connection Type 1 |
 |
 |
 |
 |
| HEX connection Type 2 |
 |
|
 |
| Triangular connection Type 1 |
 |
|
 |
 |
| Triangular connection Type 2 |
 |
|
 |
| Square connection Type 1 |
 |
|
 |
 |
| Square connection Type 2 |
 |
|
 |
| Octagonal connection Type 1 |
 |
|
 |
 |
| Octagonal connection Type 2 |
 |
|
 |
