NOVOM2 Teleskoper milling unit


Overview of the characteristics 


  • Computer-controlled two-chamber milling unit with Teleskoper Orbit ⌀ 125 mm in both milling chambers
  • Separate milling chambers enable sequential wet and dry processing of the materials without manual in-between cleaning
  • Stand-alone solution: Integrated PC with touch screen for direct control (loading of tools, controlling of milling and calibration processes)
  • Fully automated 5+1 axis simultaneous milling technology
  • The following blanks can be inserted (for some, holders are required): Material blanks with ⌀ 95 mm, ⌀ 98 mm, ⌀ 106 mm and ⌀ 125 mm as well as 18 glass-ceramic and 12 Raw-Abutment® blanks
  • The blanks can be removed from the orbit and allow a high-precision repositioning in μm range when re-inserted
  • High-performance milling spindle with optimised cooling water supply for particularly gentle material elaboration
  • With wet processing function for processing all common dental materials and kinds of restorations (zirconia, resin, wax, Sintermetall, cobalt-chrome, titanium, Raw-Abutments®, glass-ceramics and composite)
  • CAD/CAM milling bur 6 mm and orbit with opposed rotary axes (A and B) for a stable elaboration process; elaboration time can be varied by selecting different surface qualities
  • Spaciously designed, optimally illuminated and easily accessible milling chambers
  • Contamination-protected tool chamber separated from the milling chambers, with automatic 21-compartment tool changer function and space for up to two additional tool magazines with 21 tool slots each (3x21); up to 63 tool slots
  • Optical tool detection for a secure selection of the suitable milling tools
  • Automatic self-cleaning and drying function and Cleaning Kit for manual cleaning

NOVOM2 Dual Double Teleskoper milling unit


Accessories 


  Novo! Tool magazine D6
with 21 tool slots for the storage and organisation of tools

Código do Artigo: ZBAC4201
  Novo! Ioniser M2 / M2 Dual right
Device for the electrostatic discharge of plastic shavings for more cleanliness during the milling process

Código do Artigo: ZBAC3321
  Novo! Blank Holder ⌀ 95 Teleskoper
Holder for fixing material blanks with a diameter of ⌀ 95 mm, for exchange in combination with Teleskoper Orbit

Código do Artigo: ZBAC2850
  Novo! Blank Holder ⌀ 98 Teleskoper
Holder for fixing material blanks with a diameter of ⌀ 98 mm in combination with Teleskoper Orbit

Código do Artigo: ZBAC2830
  Novo! Blank Holder ⌀ 106 Teleskoper
Holder for fixing material blanks with a diameter of ⌀ 106 mm in combination with Teleskoper Orbit

Código do Artigo: ZBAC2840
  Novo! Raw-Abutment® Holder 6 Teleskoper
Holder for fixing and for the serial processing of up to six prefabricated titanium abutment blanks (Raw-Abutments®), in combination with Teleskoper Orbit

Código do Artigo: ZBAC2800
  Novo! Glass Ceramics Holder 9 Teleskoper
Holder for fixing and for the serial processing of up to nine glass-ceramic blanks, in combination with Teleskoper Orbit

Código do Artigo: ZBAC2820  
  JawPositioner Support
Support used to fix the JawPositioner into the orbit of the Zirkonzahn milling unit

Código do Artigo: ZBAC3511

 

Processable materials 


 
 Zirconia  Resin  Wax  Wood  Sinter
 metal
 Chrome-
 Cobalt
 Titanium  Raw-
 Abutment®
 Glass
 ceramics
 Composite

Technical specifications 


 

Weight 240 kg

Width 125 cm + 14 cm Cleaning Kit

Height 69 cm

Depth 62 cm

Casing Hardened Securit glass UNI ISO 12150

Processing axes 5+1

Power capacity 600 W

Operating voltage 100 – 240V

Power input 2.6 A (5.5 A)

Chuck ⌀ 6 mm

Spindle speed Depending on equipment

Torque 13 Ncm

Orbit 2x Orbit Teleskoper ⌀ 125 mm

Workpieces
(some with special holders
at extra charge):
up to 2x material blanks ⌀ 95 mm, ⌀ 98 mm, ⌀ 106 mm as well as ⌀ 125 mm, up to 18 glass-ceramic blanks, up to 12 prefabricated titanium abutment blanks (Raw-Abutments®), JawPositioner transfer patterns

Mais informação e acessórios 


 
     
Possíveis aplicações   Software   Materiais fresaveis   Acessórios