Zirkonzahn Multi Unit Abutments 


 

 
 
The Zirkonzahn Multi Unit Abutments, the Zirkonzahn Multi Unit Abutments 17° and the Zirkonzahn Multi Unit Abutments 30° are especially suitable for multi‑unit restorations. They are available for all existing implant systems and their connections to the secondary structure are standardised: for this reason, the secondary structure can be screwed directly or with additional titanium bases to different implants without any problems. A further advantage of the standardised connection is that using these abutments, also other components (e.g. titanium bases, Scanmarkers, etc.) are reduced to one connection and divergences can be compensated.
 

Multi Unit Abutment non hex 

 
Zirkonzahn Multi Unit Abutments NON HEX without anti‑rotation connection and without anti‑rotation device on the platform are especially suited for multiunit restorations. They are designed in one piece to prevent bacterial entrance. The application of the Multi Unit Abutments NON HEX is very easy, because all types of implants have been adapted to a standard connection. In order to offer the best possible solution for every case, they are also available in fi ve different gingival heights.
 
For multi‑unit restorations
Conical Titanium Base as component of the Multi Unit Abutment
Without anti‑rotation connection and without anti‑rotation device on the platform
Also available gold‑plated for increased biocompatibility and reduced grey values
Available in different gingival heights

новыйMulti Unit Abutment angled 

Zirkonzahn Multi Unit Abutments 17° and Zirkonzahn Multi Unit Abutments 30° are available with an angle of 17° or 30° to compensate for any inclinations of the implants. They are also equipped with two different anti‑rotation connection types which allow intermediate positions. They can be used for single and multi‑unit restorations.
 
For single crowns and multi‑unit restorations
Conical Titanium Base, Parallel Titanium Base and Parallel Titanium Base One Position as components of the Multi Unit Abutment 17° and the Multi Unit Abutment 30°. One Position titanium bases are used to screw single crowns on Multi Unit Abutments 17° with anti‑rotation device
With anti‑rotation connection and additional anti‑rotation device on the platform
Also available gold‑plated for increased biocompatibility and reduced grey values
Available in different gingival heights
 
 

Connection possibilites Multi Unit Abutment

Depending on the position of the implant, with the two different connection types (1 and 2) the number of connection possibilities has doubled.

 
  Side view Top view MUA can be placed in different positions by each connection type (e.g. on every 60° of a HEX connection). Having the possibility to choose a further connection type, the MUA can be placed in intermediate positions (e.g. on every 30° of a HEX connection).
HEX connection
Type 1
HEX connection
Type 2
 
 
Triangular connection
Type 1
Triangular connection
Type 2
 
 
Square connection
Type 1
Square connection
Type 2
 
 
Octagonal connection
Type 1
Octagonal connection
Type 2