новыйM2 Teleskoper milling unit


Overview of the characteristics 


  • Computer-controlled two-chamber milling unit with Teleskoper Orbit ⌀ 125 mm in the left milling chamber and orbit ⌀ 95 mm in the right milling chamber
  • Separate milling chambers enable sequential wet and dry processing of the materials without manual in-between cleaning
  • Stand-alone solution: Integrated PC with touch screen for direct control (loading of tools, controlling of milling and calibration processes)
  • Fully automated 5+1 axis simultaneous milling technology
  • The following blanks can be inserted (for some, holders are required): Material blanks with ⌀ 95 mm, ⌀ 98 mm, ⌀ 106 mm and ⌀ 125 mm as well as up to 13 glass-ceramic and up to 9 Raw-Abutment® blanks
  • The blanks can be removed from the orbit and allow a high-precision repositioning in μm range when re-inserted
  • High-performance milling spindle with optimised cooling water supply for particularly gentle material elaboration
  • With wet processing function for processing all common dental materials and kinds of restorations (zirconia, resin, wax, Sintermetall, cobalt-chrome, titanium, Raw-Abutments®, glass-ceramics and composite)
  • CAD/CAM milling bur 6 mm and orbit with opposed rotary axes (A and B) for a stable elaboration process; elaboration time can be varied by selecting different surface qualities
  • Spaciously designed, optimally illuminated and easily accessible milling chambers
  • Contamination-protected tool chamber separated from the milling chambers, with automatic 21-compartment tool changer function and space for up to two additional tool magazines with 21 tool slots each (3x21); up to 63 tool slots
  • Optical tool detection for a secure selection of the suitable milling tools
  • Automatic self-cleaning and drying function and Cleaning Kit for manual cleaning

M2/M2 DUAL UPGRADE KIT
The M2 Dual Teleskoper milling unit can be upgraded to the M2 Dual Double Teleskoper milling unit by integrating an additional Teleskoper Orbit ⌀ 125 mm. This enables the elaboration of material blanks with a diameter of ⌀ 95 mm, ⌀ 98 mm, ⌀ 106 mm and ⌀ 125 mm. It also increases the number of glass-ceramic and Raw-Abutment® blanks that can be elaborated in one milling process.

новыйM2 Dual Teleskoper milling unit


Accessories 


  новый! Tool magazine D6
with 21 tool slots for the storage and organisation of tools

товарный номер: ZBAC4201
  новый! Ioniser M2 / M2 Dual right
Device for the electrostatic discharge of plastic shavings for more cleanliness during the milling process

товарный номер: ZBAC3321
  Raw-Abutment® Holder
Holder for fixing and for the serial processing of up to three prefabricated titanium abutment blanks (Raw-Abutments®) in the Zirkonzahn milling unit with ⌀ 95 mm orbit

товарный номер: ZBAC1691
  Glass Ceramics Holder
Holder for fixing and for the serial processing of up to four glass ceramic blanks in the Zirkonzahn milling unit with ⌀ 95 mm orbit

товарный номер: ZBAC1651   
  JawPositioner Support
Support used to fix the JawPositioner into the orbit of the Zirkonzahn milling unit

товарный номер: ZBAC3511
  новый! Blank Holder ⌀ 95 Teleskoper
Holder for fixing material blanks with a diameter of ⌀ 95 mm, for exchange in combination with Teleskoper Orbit

товарный номер: ZBAC2850
  новый! Blank Holder ⌀ 98 Teleskoper
Holder for fixing material blanks with a diameter of ⌀ 98 mm in combination with Teleskoper Orbit

товарный номер: ZBAC2830
  новый! Blank Holder ⌀ 106 Teleskoper
Holder for fixing material blanks with a diameter of ⌀ 106 mm in combination with Teleskoper Orbit

товарный номер: ZBAC2840
  новый! Raw-Abutment® Holder 6 Teleskoper
Holder for fixing and for the serial processing of up to six prefabricated titanium abutment blanks (Raw-Abutments®), in combination with Teleskoper Orbit

товарный номер: ZBAC2800
  новый! Glass Ceramics Holder 9 Teleskoper
Holder for fixing and for the serial processing of up to nine glass-ceramic blanks, in combination with Teleskoper Orbit

товарный номер: ZBAC2820  

 

Processable materials 


 
 Zirconia  Resin  Wax  Wood  Sinter
 metal
 Chrome-
 Cobalt
 Titanium  Raw-
 Abutment®
 Glass
 ceramics
 Composite

Technical specifications 


 

Weight 240 kg

Width 125 cm + 14 cm Cleaning Kit

Height 69 cm

Depth 62 cm

Casing Hardened Securit glass UNI ISO 12150

Processing axes 5+1

Power capacity 600 W

Operating voltage 100 – 240V

Power input 2.6 A (5.5 A)

Chuck ⌀ 6 mm

Spindle speed Depending on equipment

Torque 13 Ncm

Orbit 1x Orbit ⌀ 95 mm, 1x Teleskoper Orbit ⌀ 125 mm

Workpieces
(some with special holders
at extra charge):
2x material blanks ⌀ 95 mm, 1x material blank ⌀ 98 mm, 106 mm, 125 mm, up to 9 prefabricated titanium abutment blanks (Raw-Abutments®), up to 13 glass-ceramic blanks, JawPositioner transfer pattern