Overview of the characteristics
- Computer-controlled two-chamber milling unit with Teleskoper Orbit ⌀ 125 mm in both milling chambers
- Separate milling chambers enable sequential wet and dry processing of the materials without manual in-between cleaning
- Stand-alone solution: Integrated PC with touch screen for direct control (loading of tools, controlling of milling and calibration processes)
- Fully automated 5+1 axis simultaneous milling technology
- The following blanks can be inserted (for some, holders are required): Material blanks with ⌀ 95 mm, ⌀ 98 mm, ⌀ 106 mm and ⌀ 125 mm as well as 18 glass-ceramic and 12 Raw-Abutment® blanks
- The blanks can be removed from the orbit and allow a high-precision repositioning in μm range when re-inserted
- High-performance milling spindle with optimised cooling water supply for particularly gentle material elaboration
- With wet processing function for processing all common dental materials and kinds of restorations (zirconia, resin, wax, Sintermetall, cobalt-chrome, titanium, Raw-Abutments®, glass-ceramics and composite)
- CAD/CAM milling bur 6 mm and orbit with opposed rotary axes (A and B) for a stable elaboration process; elaboration time can be varied by selecting different surface qualities
- Spaciously designed, optimally illuminated and easily accessible milling chambers
- Contamination-protected tool chamber separated from the milling chambers, with automatic 21-compartment tool changer function and space for up to two additional tool magazines with 21 tool slots each (3x21); up to 63 tool slots
- Optical tool detection for a secure selection of the suitable milling tools
- Automatic self-cleaning and drying function and Cleaning Kit for manual cleaning
новыйM2 Dual Double Teleskoper milling unit
Accessories
новый! Tool magazine D6 with 21 tool slots for the storage and organisation of tools товарный номер: ZBAC4201 |
||
новый! Ioniser M2 / M2 Dual right Device for the electrostatic discharge of plastic shavings for more cleanliness during the milling process товарный номер: ZBAC3321 |
||
новый! Blank Holder ⌀ 95 Teleskoper Holder for fixing material blanks with a diameter of ⌀ 95 mm, for exchange in combination with Teleskoper Orbit товарный номер: ZBAC2850 |
||
новый! Blank Holder ⌀ 98 Teleskoper Holder for fixing material blanks with a diameter of ⌀ 98 mm in combination with Teleskoper Orbit товарный номер: ZBAC2830 |
||
новый! Blank Holder ⌀ 106 Teleskoper Holder for fixing material blanks with a diameter of ⌀ 106 mm in combination with Teleskoper Orbit товарный номер: ZBAC2840 |
||
новый! Raw-Abutment® Holder 6 Teleskoper Holder for fixing and for the serial processing of up to six prefabricated titanium abutment blanks (Raw-Abutments®), in combination with Teleskoper Orbit товарный номер: ZBAC2800 |
||
новый! Glass Ceramics Holder 9 Teleskoper Holder for fixing and for the serial processing of up to nine glass-ceramic blanks, in combination with Teleskoper Orbit товарный номер: ZBAC2820 |
||
JawPositioner Support Support used to fix the JawPositioner into the orbit of the Zirkonzahn milling unit товарный номер: ZBAC3511 |
Processable materials
|
Technical specifications
|
|||||
Weight | 240 kg | ||||
|
|||||
Width | 125 cm + 15 cm Cleaning Kit | ||||
|
|||||
Height | 69 cm | ||||
|
|||||
Depth | 66 cm | ||||
|
|||||
Casing | Hardened Securit glass UNI ISO 12150 | ||||
|
|||||
Processing axes | 5+1 | ||||
|
|||||
Power capacity | 600 W | ||||
|
|||||
Operating voltage | 100 – 240V | ||||
|
|||||
Power input | 2.6 A (5.5 A) | ||||
|
|||||
Chuck | ⌀ 6 mm | ||||
|
|||||
Spindle speed | Depending on equipment | ||||
|
|||||
Torque | 13 Ncm | ||||
|
|||||
Orbit | 2x Orbit Teleskoper ⌀ 125 mm | ||||
|
|||||
Workpieces (some with special holders at extra charge): |
up to 2x material blanks ⌀ 95 mm, ⌀ 98 mm, ⌀ 106 mm as well as ⌀ 125 mm, up to 18 glass-ceramic blanks, up to 12 prefabricated titanium abutment blanks (Raw-Abutments®), JawPositioner transfer patterns | ||||
|