P4000 system for 3D printing  




3D printing system with printer, software, post-curing lamp and resin


With the new 3D printing system, Zirkonzahn provides dental technicians and dentists with a practical solution for the manufacture of resin dental models. In this way, practices and mid-size dental laboratories can now benefit from a pre-set package specially conceived for the dental workflow. The complete system with pre-configured settings is particularly advantageous: not only does it ensure full compatibility between all components included, but it prevents the user from spending valuable time testing print parameters or finding the most suitable resins and devices to use in combination with the printer. The system includes:


 
     
             
P4000 Printer   Zirkonzahn.Slicer   L300 Post-Curing Lamp   Printer Resin Waterbased Beige


 
Watch the video instructions



P4000 Printer



  LCD printer with 4K monochrome display (XY resolution: 0.052 mm) and heated printing chamber.

P4000 Printer is a space-saving LCD printer equipped with a touch screen with intuitive user interface as well as WiFi, LAN and USB connections for stand-alone operations. Depending on the structure and dimensions, the large printing volume permits the simoultaneously production of up to 21 Geller models or 15 full-arch bridges. The resin vat is provided with state-of-the-art nFEP film permeable to oxygen, which, in combination with the LED panel, enables a distortion-free manufacture of dental objects in a short time. The 3D printer is open-system but works ideally in combination with the Printer Resins and Printer Resins Waterbased by Zirkonzahn, available in many colours and for different uses.
The P4000 Printer also includes the Zirkonzahn.Slicer software.
 
 
 
up to 15 full-arch models up to 21 Geller models
 
 

Technical data:


 
Size (L x W x H) 29 x 33 x 47 cm

Printing volume (L x W x H) 20 x 12,5 x 20 cm

Weight 17,2 kg

Technology LCD

Light source 405 nm ParaLED® 3.0 Module

XY Resolution 0,052 mm

Layer thickness 0,05 and 0,10 mm

Printing speed up to 90 mm/h

Operating voltage 100 – 240 V ~ 50 – 60 Hz

System Zirkonzahn OS

Operation 5” touch panel

Software Zirkonzahn.Slicer






 

Zirkonzahn.Slicer


Zirkonzahn.Slicer is fully compatible with both Zirkonzahn.Modellier and Zirkonzahn.Modifier software: the user can create the models using the Model Maker software module available in both design software and then simply import them into the slicing software for further editing. Zirkonzahn.Slicer is specifically conceived for dental use and its pre-configured settings ensure a smooth and uniform printing workflow. The pre-set parameters also allow the creation of support structures for a wide variety of dental restorations, while the printing option in multiple resolutions further reduces the printing time.




 

L300 Post-curing Lamp



  UV LED lamp (365 nm, 385 nm, 405 nm) 

The L300 Post-Curing Lamp is provided with a 360° turntable which ensures a uniform curing of the model. The post-curing lamp is also equipped with a digital control system which allows the user to complete the set-up with only one click.
 

Technical data:


 
Size (L x W x H) 21,5 x 19,5 x 28,5 cm

Inner capacity (L x W x H) 17,5 x 14 x 18,5 cm

Weight 4,2 kg

LED specification 365 nm, 385 nm und 405 nm

UV light intensity 60 W in total

Operating voltage 100 – 240 V ~ 50 – 60 Hz
 





Printer Resin Waterbased Beige



  Water-based fluid resin (405 nm)

Particularly fluid resin with low shrinkage values for highly stable printed results, which can be cleaned with water in an ultrasonic bath. Not approved for intraoral use.

Technical data:
 
Wave lenght 405 nm

Package content 1 kg/Bottle

Density 1,16 g/cm³

Viscosity 750 – 850 cPs

Surface hardness 86 Shore D

Flexural strength 92 MPa

Flexural modulus 1875 MPa

Glass-liquid transition (Tg) 65 °C

Cleaning Water, ultrasonic bath
 






 

Video instructions for the 3D P4000 Printer 


The videos explain step by step how to set up, use, clean and maintain the P4000 Printer.

 

First start up and Z-Axis calibration




 

First Print




 

Cleaning after printing




 

Maintenance





 



Download


   
  Insert Drucker P4000
 

 
 
*This is an international advertisement. Not all products mentioned are available in all countries. The product’s area of application may differ according to the country. Please contact your Sales Team for more detailed information.