Zirkonzahn.Webinar

---

   

новый Webinar Implant Prosthetics – Implant prosthetics components for more than 140 systems

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)
	Cost:	50,00 € (per webinar)
	Duration:	Part I: 1 hour Part II: 1 hour  To take part in webinar Part II, a participation in Part I is required.
	Appointments:	on request	request appointment
	Programme:	Adjusting each components to one another is particularly important especially in case of implant-supported restorations. For this reason, all our implant prosthetics components available for more than 140 systems are designed and manufactured at our production sites, in South Tyrol, to ensure always the highest quality. Do you want to know more about our components and their use? Join our two webinars and get useful application tips!

 

новый Webinar Introduction to the use of the Detection Eye intraoral scanner

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)
	Cost:	Participation is free of charge but application is obligatory – limited places available!
	Duration:	90 minutes
	Participants:	All interested dental technicians, dentists and dental assistants
	Appointment:	on request	request appointment
	Programme:	Explanation and live demonstration of the Detection Eye intraoral scanner and its hardware components Explanation of the scanning process and the Zirkonzahn.DetectionEye software  Live scan demonstration Post-processing and sending of generated data

 

новый Webinar Florence totalprox^® denture system

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)
	Cost:	Participation is free of charge but application is obligatory – limited places available!
	Duration:	1 hour
	Participants:	Zirkonzahn CAD/CAM systems and zirconia users
	Appointment:	on request	request appointment
	Programme:	Introduction to Zirkonzahn’s concept of Florence Totalprox® Denture System Presentation of the materials needed (resin, composite and bonding) Presentation of clinical cases Workflow demonstration from scanning to milling of the final denture Digital tooth set-up and articulation in Zirkonzahn.Modifier

 

новый Webinar Zirkonzahn's P4000 system for 3D printing

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)
	Cost:	Participation is free of charge but application is obligatory – limited places available!
	Duration:	1 hour
	Participants:	All dental technicians interested in 3D printing
	Appointment:	on request	request appointment
	Programme:	Introduction to the Zirkonzahn’s P4000 system for 3D printing  Illustration of the pre-set package: 3D printer, post-curing lamp, resin and software  Creation of a model using the Model Maker module in the Zirkonzahn.Modifier software Complete workflow demonstration from designing to printing

 

Webinar LIVE design of a restoration with the Double Screw Metal technique

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)
	Cost:	on request
	Duration:	90 minutes
	Participants:	Zirkonzahn customers who want to gain a deeper knowledge on the Double Screw Metal technique
	Appointment:	on request	request appointment
	Programme:	LIVE demonstration of the case shown in the lecture, with a special focus on the Double Screw Metal design Description of all workflow steps from Zirkonzahn.Archiv to Zirkonzahn.Nesting Questions & Answers

 

Webinar Catch up on the latest Zirkonzahn innovations – New solutions to save time and costs

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)
	Cost:	Participation is free of charge but application is obligatory – limited places available!
	Duration:	30 – 45 minutes
	Participants:	All dental technicians and dentists
	Appointment:	on request	request appointment
	Programme:	New workflow solutions: how to produce small zirconia restorations in only 1 hour and 55 minutes with the latest technologies New Zirkonofen Turbo with Ultraspeed programs for a fast sintering zirconia, saving 84 % of time and reducing electricity consumption of 81 % Multi Blank Holder & Mini Arti: new equipment to mill up to seven small zirconia blanks in rarely used colours and check their occlusion A quick and easy way of layering monolithic and slightly reduced zirconia restorations with the new Fresco Ceramics

 

Webinar Fresco Ceramics – LIVE application on monolithic Prettau^® 3 Dispersive^® structures

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)
	Cost:	Participation is free of charge but application is obligatory – limited places available!
	Duration:	90 minutes
	Participants:	All dental technicians interested in zirconia innovative layering techniques
	Appointment:	on request	request appointment
	Programme:	Fresco Gingiva and Fresco Enamel: characteristics, indications and advantages with respect to other charaterisation materials Other innovations for patient-specific restorations: 3D Stains with the new 3D Blue Lightning colour and Zirkonzahn Shade Guides Step-by-step application of Fresco Ceramics on Prettau® 3 Dispersive® zirconia: LIVE layering of a monolithic single crown and a small zirconia structure

 

Webinar Digital Model Making within Zirkonzahn's workflow

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)
	Cost:	on request
	Duration:	90 minutes
	Participants:	Open only for small groups of Zirkonzahn's CAD/CAM systems and zirconia users. No prior knowledge of Zirkonzahn.Modifier is required.
	Appointment:	on request	request appointment
	Programme:	How to create and work with digital models in Zirkonzahn.Modellier: from the intraoral scans and digital articulation to the design process with the CAD/CAM Model Maker software module Workflow demonstration with a prepared tooth and an implant Application of the Scan Adapter function when using scanmarkers from other producers

 

Webinar Staining Prettau^® zirconia – LIVE staining and glazing

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)
	Cost:	Participation is free of charge but application is obligatory – limited places available!
	Duration:	60 minutes
	Participants:	All dental technicians interested in zirconia colouring techniques
	Appointment:	on request	request appointment
	Programme:	White and polychromatic zirconia: overview of characteristics and specific colouring techniques for Prettau® and Prettau® Dispersive® materials How to stain Prettau® materials: LIVE staining and glazing of a front tooth with ICE Stains 3D and 3D Glaze Base

 

Webinar Zirkonzahn's scan components: products and application

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)
	Cost:	Participation is free of charge but application is obligatory – limited places available!
	Duration:	60 minutes
	Participants:	All dental technicians and dentists interested in implant planning and workflow organization
	Appointment:	on request	request appointment
	Programme:	Detailed description of all Zirkonzahn’s scan components Flexible and different options of use of the components Impression taking with analogue and digital methods Implementation of scan components in the software, also for Exocad® and 3Shape users

 

Webinar Zirkonzahn's titanium bases: products and application

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)
	Cost:	Participation is free of charge but application is obligatory – limited places available!
	Duration:	60 minutes
	Participants:	All dental technicians and dentists interested in implant planning and workflow organization
	Appointment:	on request	request appointment
	Programme:	Zirkonzahn's titanium bases one by one: detailed description, usage and advantages Integration of titanium bases in the digital workflow Implementation of components in the software, also for Exocad® and 3Shape users

 
 

Webinar Zirkonzahn.Software modules for bridge design

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)	request appointment
	Cost:	on request
	Duration:	90 minutes
	Participants:	Zirkonzahn’s scanner and CAD/CAM system users
	Appointment:	on request
	Programme:	Demonstration of CAD/CAM software modules – Zirkonzahn.Modellier’s “Abutments”, “Occlusally screwed bridges”, “Wax-up/Situ/Mirror imaging” and “Prettau® (fully anatomic)” Explanation of functions with practical examples of usage Overview of the different workflow steps required for the manufacture of a Prettau® Bridge Possible sources of error and how to avoid them

 

Webinar Working with the new Prettau^® 3 Dispersive^® zirconia and the Zirkonzahn Shade Guide

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)
	Cost:	Participation is free of charge and will be confirmed based on availability
	Duration:	30 minutes
	Participants:	Everybody interested in the new Prettau® 3 Dispersive® zirconia and Zirkonzahn Shade Guides
	Appointment:	on request	request appointment
	Programme:	The new Prettau® 3 Dispersive® zirconia with Gradual-Triplex-Technology: which features does it have? Which are the best indications for this material? How do I treat and combine it? Zirkonzahn Shade Guides, made of monolithic zirconia sample teeth: how to use it to create zirconia restorations identical to the patient’s natural tooth Q&A session

 

Webinar CAD/CAM innovations & revolutionary orbit technology ⌀ 125 mm

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)
	Cost:	Participation is free of charge but application is obligatory – limited places available!
	Duration:	90 minutes
	Participants:	Open for everybody interested in the new Zirkonzahn M2 milling units line
	Appointment:	on request	request appointment
	Programme:	The new Teleskoper Orbit ⌀ 125 mm: explanation of the new revolutionary orbit, compatible with 4 different blank diameters Double Milling: description of the 2-stage fabrication of immediate load prostheses M2 or M2 Dual: main differences and performances Dental material varieties. new blank sizes available Q&A session

 

Webinar Zirkonzahn.Double Milling

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)	request appointment
	Cost:	on request
	Duration:	90 minutes
	Participants:	small groups
	Appointment:	on request
	Programme:	Introduction to the advantages and application possibilities of Double Milling as new method for a faster but still accurate immediate patient treatment on the basis of real implantation data or preparation data Integration of the Double Milling process into the Zirkonzahn workflow for M1, M4 and M5 milling units and application with Teleskoper Orbit in the M2 and M2 Dual milling units Step-by-step explanation from Zirkonzahn.Archiv to Zirkonzahn.Nesting on the basis of concrete case studies Case study 1: Double Milling with temporary restoration on prepared teeth Case study 2: Double Milling with implant-supported immediate restoration

 

Webinar Zirkonzahn.MyWebsite

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)	request appointment
	Cost:	on request
	Duration:	60 minutes
	Participants:	Zirkonzahn customers, no previous knowledge required
	Appointment:	on request
	Programme:	Comprehensive insight into Zirkonzahn.MyWebsite – software for an easy realisation of homepages especially for dental laboratories Step-by-step software explanation: we create live a completely new website and demonstrate: how to define the basic content structure of a new website  how to include case galleries, photos and YouTube videos  how to update the page e.g. when replacing texts or adding information of new employees  which Zirkonzahn photo galleries and video galleries can be integrated how to optimise photos with the integrated image editing programme and predefined filters

 

Webinar Zirkonzahn.Modellier Update Part I

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)	request appointment
	Cost:	on request
	Duration:	90 minutes
	Participants:	Small group of Zirkonzahn customers
	Appointment:	on request
	Programme:	The basic innovations of the Zirkonzahn.Modellier software update at a glance On the basis of concrete case examples, you will discover: The new functions for digital model design  The completely renewed selection menu for implant prosthetic components The newly designed Download Center The individually definable colour selection The new short keys for tooth set-ups The new group menu for an effective data organisation The cutting discs function (Disccutter) The sectional views with precise measuring tool

 

Webinar Zirkonzahn.Modellier Update Part II

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)	request appointment
	Cost:	on request
	Duration:	60 minutes
	Participants:	Small group of Zirkonzahn zirconia and system users, participation in Zirkonzahn.Modellier Update Part I recommended
	Appointment:	on request
	Programme:	Introduction to the basic innovations of the Zirkonzahn.Modellier software update On the basis of case examples, we will show you step by step: the completely redesigned articulator window with "Permanent Movement” the use of situ-scans for the movement simulation in the articulator the transformation of eggshell pontics into anatomical pontics the use of ZZ-Loc and the new titanium bases e.g. K80 ASC in the software turning the implant geometry via the master menu (e.g. titanium bases) designing thimbles and crowns in one step  the newly designed selection of attachments with integrated 3-D viewer loading of grinded try-ins as wax-up into an already existing design simultaneous removal of all overlaps (approximal, occlusal, gingival/pontic) via free-form tool  blocking out the undercuts of the adjacent teeth, taking into account the direction of insertion and adapting the interproximal areas

   

Webinar Zirkonzahn.Modifier (Basic)

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)	request appointment
	Cost:	on request
	Duration:	90 minutes
	Participants:	small group of Zirkonzahn customers, no previous knowledge of Zirkonzahn.Modifier required
	Appointment:	on request
	Programme:	Graphics card update Step-by-Step: Virtual Waxup Design Introduction to key functions such as Multi-View-Management and Scaling Intelligent tooth setup: Individuality despite positioning automatisms and the integration of natural tooth libraries Insights into the newly designed virtual articulator window Integration of Zirkonzahn.Modifier into the Zirkonzahn workflow from Archiv to Nesting

 

Webinar Zirkonzahn.Modifier (Advanced)

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)	request appointment
	Cost:	on request
	Duration:	90 minutes
	Participants:	small group of Zirkonzahn customers
	Appointment:	on request
	Programme:	Software Module Overview – Dynamic Face Animation: Simulation of static 3D face scans as animated smile movements coupled with planed restorations Innovation – Generate individual mockups based on the pre-planned functional tooth setup Tooth setups over reference planes and spheres with natural occlusion concepts Boolean Operations Tips and tricks in the Multi-View Mode Software Module Overview – Modifier Virtual Articulator with a newly conceptualized articulator room

 

Webinar Zirkonzahn.Scan

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)	request appointment
	Cost:	on request
	Duration:	90 minutes
	Participants:	max. 5 clients with basic knowledge in Zirkonzahn.Scan
	Appointment:	on request
	Programme:	Graphics card update Complete patient data integration: intraoral scans, 2D photos, 3D facial scans, DICOM and STL files Virtual articulation in Zirkonzahn.Scan software with PlaneSystem® and face bow Use and positioning of digital reference planes Special functions in Zirkonzahn.Scan (e.g. Quick-Register, Adjustment, Extras)

 

Zirkonzahn.Webinar Individual

---

 

	Place:	Cisco Webex (microphone and webcam, stable Internet connection required)	request appointment
	Cost:	on request
	Duration:	up to 2.5 hours or up to 4 hours
	Appointment:	on request
	Programme:	The contents of the webinar are compiled individually. For inspiration we have listed some possibilities here: Installation and operation of the Zirkonzahn CAD/CAM system as well as basic introduction to working with the Zirkonzahn.Software for new customers Introduction to the Zirkonzahn.Modifier software Introduction to the different software modules of the Zirkonzahn.Modellier software Combination of different software modules Explanation and articulation of different patient data in the Zirkonzahn.Scan software Digital design of an immediate restoration  Digital design of a secondary bar structure More efficient working thanks to Double Milling (pre-milling of the upper side of the restoration)