Zirkonzahn.Nesting – Nesting Software 



 
  • Axis-oriented nesting programme for the ideal positioning of dental restoration data in the milling blank.
  • All existing blanks will be saved in one library. This allows, at any time and from an economic point of view, to select the smallest possible blank and to fully benefit from already used blanks.
  • Automatic blank registration via webcam – during the registration of the blank, the error potential is minimized because typing errors are excluded. In addition, the quality management is improved, because batch numbers can be tracked.
  • Automatic docking – if the restoration is positioned outside the blank, it is automatically repositioned by the software at the ideal place on the brink of the blank.
  • Parallel Speed Calculation – all milling steps of a work can be calculated simultaneously with a considerable reduction of time.
  • Simultaneous calculation of several blanks – the milling paths of several jobs in different blanks can be calculated simultaneously.
  • Coloured display of the materials with gradient shading as well as rendering function with a pre-visualisation of the milling result.
  • Upgraded CAD/CAM STL-Import software module – with surface analysis for the identification and manual modification of important parameters such as preparation lines, screw channels etc.
  • STL Raw Import – for the milling of individual titanium abutments which have been designed with a design software of another producer (not Zirkonzahn.Modellier).
  • Collision Detection – reports possible collisions of the tool with the orbit or the blank.
  • Mechanical finishing of the friction of secondary structures which will be fixed on telescopic crowns.
The software is available in the following languages:
German, English, Italian, Spanish, French, Chinese (simplified), Chinese (traditional), Greek, Russian, Korean, Turkish, Czech, Danish, Finnish, Hungarian, Japanese, Norwegian, Polish, Portuguese, Swedish, Arabic (Saudi Arabia)
 

NEWZirkonzahn.CAM High-Speed




With the new Zirkonzahn.CAM High-Speed module in the Zirkonzahn.Nesting software, we have significantly reduced not only calculation and nesting times but also the milling processes for dental restorations made from soft materials. For example, a complete denture (with upper and lower bases and teeth) can be milled in just approximately 2 hours and 20 minutes.

This cutting-edge technology boosts productivity while ensuring the highest level of precision, enabling our customers to work faster – without compromising quality standards.
 

Comparison between Zirkonzahn.CAM and Zirkonzahn.CAM High-Speed



 
Calculation and nesting
MM:SS*
Milling time
HH:MM:SS

Crown
(zirconia)
 
01:50
 
- 91 %
00:10
 
19:20
 
- 44 %
10:50
Crown
(resin)
 
01:30
 
- 89 %
00:10
 
12:50
 
- 55 %
05:50

Bridge
(zirconia)
 
02:10
 
- 77 %
00:30
 
39:00
 
- 51 %
19:00
Bridge
(resin)
 
01:50
 
- 82 %
00:20
 
22:50
 
- 46 %
12:20

Denture teeth
(resin)
 
05:40
 
- 74 %
01:30
 
01:51:00
 
- 71 %
32:00

Denture base
(resin)
 
05:20
 
- 59 %
02:10
 
02:09:00
 
- 60 %
51:40

Bite splint
(resin)
 
05:00
 
- 53 %
02:20
 
02:17:00
 
- 70 %
40:50

Z
Zirkonzahn.CAM
HS
Zirkonzahn.CAM High-Speed
*The values vary depending on the processing power of the PC used.
 
 

Minimum requirements for using Zirkonzahn.CAM High-Speed


Nesting PC:
  • Windows 11 with 32 GB of RAM
  • Current NVIDIA graphics card with the latest driver

Software:
  • Zirkonzahn.Modifier software, version 9545 or higher
  • Zirkonzahn.Nesting software, version 9094 or higher
  • Zirkonzahn.Fräsen software, version 4006_0040 or higher

Milling unit:
  • Compatible with the M1 Wet Heavy Metal milling unit, the M2 Comfort Line, the M4 Wet Heavy Metal and the M6 Teleskoper Blank Changer milling units.
  • Chuck with Ø 6 mm
  • CAD/CAM milling bur 2,5 R PMMA (item number: FR6030) for the milling of resin