Zirkograph 025 ECO 




The original
This copy-milling unit, also called 'The Volksfräser', is a machine designed for the manual manufacture of crown & bridge framework made of zirconia. The Volksfräser has been conceived in such a way that, owing to its small dimensions of 59 cm length and 25 cm width, it can be ideally used as a lab bench. Contrary to the Zirkograph 025, our 5-axis milling unit, the Volksfräser is supplied in its base execution as a 4-axis milling equipment only. Nevertheless, this is not a disadvantage because works with up to 14 units can be performed. Only wide spread, implant-borne, occlusally screw-retained bridges cannot be realized since the individual implants are never placed in parallel but they diverge more or less from one another. A 5th axis is required for such special bridges. As of now this 5th axis is available for the Volksfräser as well.

Yves Probst
„The Zirkograph has added some zest/brought life into our laboratory, and how!“
Yves Probst, master dental technician from France
 


Zirkograph 025 ECO with 5th axis.

 











 
Lenght: 59 cm
Width: 25 cm
Height: 57 cm
Weight: 21 kg
   
Output Power: 190 W
Compressed
Air Supply:
6 bar
   
Range of Application: From single crowns to 16-unit bridges (using the 5th axis occlusally screw-retained bridges can be created)
Remarks: 5th axis optional by request

Designer Zirkograph 





Photogallery



Designer Zirkograph

 

Length: 61 cm
Width: 23 cm
Height: 55 cm
Weight: 24 kg
   
Output Power: 190 W
Compressed
Air Supply:
6 bar
   
Range of Application: From single unit crown to 16 unit bridges
Remarks: 5th axis included

Accessories 


5th axis for Zirkograph 025 ECO
Five axes milling device for the Zirkograph 025 ECO,
which allows you any movement to accommodate
complex cases

Item numberr: ZBAA8241
Pendulum
Content: 1x pendulum arch, 2x retainer pins (2.46/M2; 2.05/M1.4),
2x positioning screws
Assists perpendicular abutment alignment of screw retained
implant bridges for milling

Item number: ZBAA8231
Retainer Pin 2,46/M2
Accessory for pendulum

Item number: ZBAA8351
Retainer Pin 2,05/M1,4
Accessory for pendulum

Item number: ZBAA8361
Retainer Pin 3/M2
Accessory for pendulum

Item number: ZBAA8371
Retainer Pin 1,6/M1,4
Accessory for pendulum

Item number: ZBAA8381
Retainer Pin long 2,46/M2
Accessory for pendulum for extra long screw canals

Item number: ZBAA8356
Retainer Pin long 2,05/M1,4
Accessory for pendulum for extra long screw canals

Item number: ZBAA8366
Retainer Pin long 3/M2
Accessory for pendulum for extra long screw canals

Item number: ZBAA8376
Retainer Pin long 1,6/M1,4
Accessory for pendulum for extra long screw canals

Item number: ZBAA8386
Dust ring for Zirkograph 025
Quantity: 1 pc
Optimal extraction power and reduced dust spreading over your workbench

Item number: ZBAA8291
Dust ring for Zirkograph 025 ECO
Quantity: 1 pc
Optimal extraction power and reduced dust spreading over your workbench

Item number: ZBAA8301
Dust cover for Zirkograph 025
Quantity: 1 pc

Item number: ERAA0511
Dust cover for Zirkograph 025 ECO
Quantity: 1 pc

Item number: ERAA0421
Dust cover for Zirkograph 025 ECO 5. Achse
Quantity: 1 pc

Item number: ZBAA8271
Dust cover for Designer Zirkograph - Back
Quantity: 1 pc

Item number: ZBAA9601
Dust cover for Designer Zirkograph - Front
Quantity: 1 pc

Item number: ZBAA9611
Dust Bowl for Zirkograph 025
Content: 1 bowl
Maximises dust extraction suction during milling (only in combination with tilting device)

Item number: ZBAA9501
Dust Bowl for Zirkograph 025 ECO and Designer Zirkograph
Content: 1 bowl
Maximises dust extraction suction during milling (only in combination with 5th axis)

Item number: ZBAA9511
Upgrade Set for dust Bowl for Zirkograph 025
Content: 1 bowl, 2 intermediate panels Maximises dust extraction suction during milling
(only in combination with tilting device)
For systems without built-in magnets

Item number: ZBAA9551
Upgrade Set for dust Bowl for Zirkograph 025 ECO and Designer Zirkograph
Content: 1 bowl, 2 intermediate panels Maximises dust extraction suction during milling
(only in combination with 5th axis)
For systems without built-in magnets

Item number: ZBAA9561
Ball bearing housing for spring arm D=12 mm
Spring slide connector to horizontal spring arm

Item number: ERAA0011
Spring for Zirkograph 025 ECO and Designer Zirkograph
Support spring for milling arm

Item number: ERAA0623
Clamp claw aluminium
Fastens milling table inserts
For Zirkograph 025, 025 ECO and Designer Zirkograph

Item number: ERAA0871
Cylinder head screw M4 x 8 galvanized for stainless-steel inserts
Fastens clamps for milling table inserts

Item number: ERAA0031
Cylinder head screw M4 x 12 galvanized for stainless-steel inserts
Fastens clamps for milling table inserts

Item number: ERAA0033