This copy-milling unit, also called 'The Volksfräser', is a machine designed for the manual manufacture of crown & bridge framework made of zirconia. The Volksfräser has been conceived in such a way that, owing to its small dimensions of 59 cm length and 25 cm width, it can be ideally used as a lab bench. Contrary to the Zirkograph 025, our 5-axis milling unit, the Volksfräser is supplied in its base execution as a 4-axis milling equipment only. Nevertheless, this is not a disadvantage because works with up to 14 units can be performed. Only wide spread, implant-borne, occlusally screw-retained bridges cannot be realized since the individual implants are never placed in parallel but they diverge more or less from one another. A 5th axis is required for such special bridges. As of now this 5th axis is available for the Volksfräser as well.
„The Zirkograph has added some zest/brought life into our laboratory, and how!“
Yves Probst, master dental technician from France
Zirkograph 025 ECO with 5th axis.
|Output Power:||190 W|
|Range of Application:||From single crowns to 16-unit bridges (using the 5th axis occlusally screw-retained bridges can be created)|
|Remarks:||5th axis optional by request|