Prettau® 2 Dispersive® 



*

Particularly translucent zirconia with high flexural strength and natural colour gradient
available now!


The Prettau® Bridge* has been used for patients all over the world for 10 years now. Tens of thousands of structures have been skilfully coloured by hand and refined individually for each patient.

All these experiences have been integrated into the development of the new Prettau® 2 Dispersive® zirconia. The result is a particularly translucent zirconia with a high flexural strength which is provided with a natural colour shading already during the manufacturing process. In order to achieve a particularly smooth shade transition after the sintering process, it is important that the colours are not distributed in layers, but finely scattered.

Depending on the aesthetic requirements, the structures can also be further individualised by manually applying Colour Liquids, ceramics or stains. The biocompatible zirconia that can be designed monolithically or reduced, is suitable for both single crowns as well as full arch bridges*.
 

Properties at a glance:


  • Pre-coloured zirconia with natural colour gradient, excellent flexural strength and particularly high translucency
  • Merging colour gradient that reproduces the natural tooth colours from dentine to enamel, colour scheme from A1-D4
  • Manual colouring with Colour Liquids is not required any more, but it can be used to achieve a more patient specific result
  • Especially suitable for full arch restorations* but also for single crowns, inlays, onlays, veneers and bridges with up to 14 elements*, occlusally screwed or cemented (fully anatomical or reduced for veneering with ICE Zirkon Ceramics)
  • No ceramic chipping (thanks to the fully anatomical design)
  • No abrasion to the antagonist
  • After sintering, the restoration can be personalised with ICE Zirkon Stains Prettau® and ICE Zirkon 3D Stains by Enrico Steger
 

Processing:


  • CAM-dry processing
  • Sintering (1600 °C)
  • Glaze with 3D Glaze Base or Glaze Plus
  • High gloss polishing
  • Insertion: Cementation or screwing
 

Optional processing:


 

Comparison of the characteristics:


_________________ _________________ _________________ _________________ _________________ _________________
PRETTAU® PRETTAU® PRETTAU® PRETTAU® PRETTAU® PRETTAU®
  2 2 3 4 4
    DISPERSIVE® DISPERSIVE® ANTERIOR® ANTERIOR®
DISPERSIVE®
_________________ _________________ _________________ _________________ _________________ _________________
Translucency Translucency Translucency Translucency Translucency Translucency
_________________ _________________ _________________ _________________ _________________ _________________
Flexural strength Flexural strength Flexural strength Flexural strength Flexural strength Flexural strength
_________________ _________________ _________________ _________________ _________________ _________________
      Gradual-Triplex-Technology*    
           
Without colour gradient Without colour gradient With colour gradient With colour gradient Without colour gradient With colour gradient
           
Without flexural strength gradient Without flexural strength gradient Without flexural strength gradient With flexural strength gradient Without flexural strength gradient Without flexural strength gradient
           
Without translucency gradient Without translucency gradient Without translucency gradient With translucency gradient Without translucency gradient Without translucency gradient
_________________ _________________ _________________ _________________ _________________ _________________
Individual colouring
with Colour Liquids
Individual colouring
with Colour Liquids
Optional: Individualisation
with Colour Liquid
Intensiv
Optional: Individualisation
with Colour Liquid
Intensiv
Individual colouring
with Colour Liquids
Optional: Individualisation
with Colour Liquid
Intensiv
_________________ _________________ _________________ _________________ _________________ _________________
Sintering temperature Sintering temperature Sintering temperature Sintering temperature Sintering temperature Sintering temperature
1600 °C 1600 °C 1600 °C 1500 °C 1500 °C 1500 °C
_________________ _________________ _________________ _________________ _________________ _________________
Monolithic design in
the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
Monolithic design in
the anterior area and
in the posterior area possible
_________________ _________________ _________________ _________________ _________________ _________________
           
*Gradual-Triplex-Technology: The zirconia is already provided with colour, translucency and flexural strength gradients during the production process. This results in a natural colouring, a highly translucent cutting edge and an extremely high flexural strength at the tooth neck.
 
 

Indications:


PRETTAU® PRETTAU® PRETTAU® PRETTAU® PRETTAU® PRETTAU®
  2 2 3 4 4
    DISPERSIVE® DISPERSIVE® ANTERIOR® ANTERIOR®
DISPERSIVE®
_________________ _________________ _________________ _________________ _________________ _________________
Copings Copings Copings Copings Copings Copings
_________________ _________________ _________________ _________________ _________________ _________________
Inlay, Onlay, Veneer Inlay, Onlay, Veneer Inlay, Onlay, Veneer Inlay, Onlay, Veneer Inlay, Onlay, Veneer Inlay, Onlay, Veneer
_________________ _________________ _________________ _________________ _________________ _________________
Crowns Crowns Crowns Crowns Crowns Crowns
_________________ _________________ _________________ _________________ _________________ _________________
Max. three-unit
bridges
Max. three-unit
bridges
Max. three-unit
bridges
Max. three-unit
bridges
Max. three-unit
bridges
Max. three-unit
bridges
_________________ _________________ _________________ _________________ _________________ _________________
Multiple-unit bridge Multiple-unit bridge Multiple-unit bridge Multiple-unit bridge    

(bar-supported)
   
_________________ _________________ _________________ _________________ _________________ _________________
Circular bridges* Circular bridges* Circular bridges* Circular bridges*    

(bar-supported)
   
           
           

Studies


Studies

More...
 

Prettau® 2 Dispersive®



Prettau® 2 Dispersive® A2 95H14


Package content:
1 pc
Item number:
ZRKC8021A02
Colour:

Height:
System / diameter:


Particularly translucent zirconia with a high flexural strength and natural colour gradient for single crowns up to large-span bridges* (full contour restorations or reduced structures for ceramic layering)

Elaboration with CAD/CAM milling bur Zirconia




Prettau® 2 Dispersive® Bleach 0M1 95H16


Package content:
1 pc
Item number:
ZRKC80310M1
Colour:

Height:
System / diameter:


Particularly translucent zirconia with a high flexural strength and natural colour gradient for single crowns up to large-span bridges* (full contour restorations or reduced structures for ceramic layering)

Elaboration with CAD/CAM milling bur Zirconia



Prettau® 2 Dispersive® A2 16er


Package content:
1 pc
Item number:
ZRKC0701A02
Colour:

Size:
System / diameter:


Particularly translucent zirconia with a high flexural strength natural colour gradient for single crowns up to large-span bridges* (full contour restorations or reduced structures for ceramic layering)



Prettau® 2 Dispersive® Bleach 0M1 1H16


Package content:
3 pcs
Item number:
ZRKC01030M1
Colour:

Height:
System / diameter:


Particularly high translucent and flexural strenght zirconia with natural colour gradient. Suitable for single crowns (monolithic or reduced restorations for ceramic layering).

Compatible with the Multi Blank Holder




* In Canada bridge indications are limited to 6 units.