M2 milling unit comfort line – Fully automatic, flexible, open 

The new M2 milling unit comfort line stands for modern operating comfort and flexibility. With the M2 Wet Heavy Metal, the M2 Teleskoper, the M2 Dual Wet Heavy Metal, the M2 Dual Teleskoper and the M2 Dual Double Teleskoper, the comfort line comprises five milling units with fully automatic 5+1 axis simultaneous milling technology. The highlight in terms of flexibility is the extra-large Teleskoper Orbit (⌀ 125 mm) that, in combination with special holders, permits to process all common soft and hard material blanks of ⌀ 95 mm, ⌀ 98 mm, ⌀ 106 mm or even ⌀ 125 mm. The blanks can be removed from the orbit and re-inserted later at the same position with high precision in µm range. This is particularly helpful for adjusting the friction of telescopic jobs or for the two-stage fabrication of immediate restorations in case of implant-supported prostheses (with the double milling technique). All M2 milling units are stand-alone solutions: it is possible to start milling and calibration processes or load elaboration tools directly from the machine via the integrated PC with touchscreen. The optical tool detection ensures greater safety during milling. The two separate large milling chambers are the trademark of the M2 Dual milling units. However, also the M2 and the M2 Telescoper milling units are characterised by spaciously designed, optimally illuminated and easily accessible milling chambers as well as with a separated, contamination-protected tool chamber with 21-compartment automatic tool changer (optional up to 3 x 21 for the M2 Dual versions) The automatic self-cleaning function, the integrated Cleaning Kit for an easy cleaning of the milling chambers and the Ioniser (optional) ensure a particularly clean elaboration of the materials. The performance range of the machines can be extended by integrating different accessories available, e.g. the Glass Ceramic/Raw-Abutment® Holder and the JawPositioner Support. With the M2/M2 Dual Upgrade Kit, the M2 Wet Heavy Metal and the M2 Dual Wet Heavy Metal milling units can be upgraded to the Teleskoper versions.



Features at a glance
  • Open milling units with Teleskoper Orbit ⌀ 125 mm or orbit ⌀ 95 mm
  • Stand-alone milling units: Integrated PC with touch screen for direct control (loading of tools, controlling of milling and calibration processes)
  • Fully automated 5+1 axis simultaneous milling technology
  • High-performance milling spindle with optimised cooling water supply for particularly gentle material elaboration
  • Wet and dry processing of all common dental materials (zirconia, resin, wax, Sintermetall, cobalt-chrome, titanium, Raw-Abutments®, glass-ceramics and composite).
  • Spaciously designed, optimally illuminated and easily accessible milling chambers
  • Contamination-protected tool chamber, which is separated from the milling chamber, with automatic 21-compartment tool changer function
  • Optical tool detection for a secure selection of the suitable milling tools
  • Organised storage of elaboration tools in tool magazines with 21 tool slots each (in total 63 or 84 tool slots)
  • Automatic self-cleaning and drying function and Cleaning Kit for manual cleaning
  • The Ioniser (optional) ensures clean resin processing with a significantly shorter cleaning time
  • Teleskoper Orbit ⌀ 125 mm (available for the versions M2 Teleskoper, M2 Dual Teleskoper and M2 Dual Double Teleskoper): in combination with special holders, material blanks with a diameter of ⌀ 95 mm, ⌀ 98 mm, ⌀ 106 mm or even ⌀ 125 mm can be elaborated. Blanks can be removed and can be reinserted back into the orbit at exactly the same position with high-precision in μm range, e.g. for the adjustment of the friction and for Double Milling
 

NewExtra large Teleskoper Orbit (⌀ 125 mm)

    ⌀ 95  
2
36
25
   2 bite splints
36 resin elements
25 zirconia elements
    ⌀ 98  
2
34
23
   2 bite splints
34 resin elements
23 zirconia elements
    ⌀ 106  
3
44
31
   3 bite splints
44 resin elements
31 zirconia elements
    ⌀ 125  
4
57
     4 bite splints
57 resin elements
        Bite splints Resin Zirconia    
    The highlight in terms of flexibility is the extra-large Teleskoper Orbit (⌀ 125 mm). In combination with special holders, it permits to process all common soft and hard material blanks with ⌀ 95 mm, ⌀ 98 mm, ⌀ 106 mm or even ⌀ 125 mm as well as glass-ceramic and Raw-Abutment® blanks. The blanks can be removed from the orbit and re-inserted later into the orbit at the same position with high precision in µm range. 






Blank with ⌀ 106 mm 
Blank with ⌀ 106 mm - 24 % larger milling surface





 Friction
Adjusting the friction of telescopic works created with the milling units of the M2 milling unit series with Teleskoper Orbit





Double Milling
Double Milling with milling units of the M2 milling unit series with Teleskoper Orbit: Time-saving milling of implant-supported restorations