NOWOSCMulti Blank Holder 



 

 

7 crowns – 7 colours – 7 patients


The new Multi Blank Holder 4x1 and Multi Blank Holder 7x1 Teleskoper are special holders for processing 1-size blanks in different colours and heights. The Multi Blank Holder 4x1 can be used in all milling units with an orbit diameter of 95 mm. The Multi Blank Holder 7x1 Teleskoper is specifically developed for the Teleskoper Orbit ⌀ 125 mm, but can also be used in the M4 Wet Heavy Metal milling unit thanks to the Teleskoper Plate. 

 
 
Multi Blank Holder 4x1   Multi Blank Holder 7x1 Teleskoper
 
 
  The Multi Blank Holder is particularly advantageous: in just one milling process it allows to produce seven single crowns in little-used tooth shades. In this way, it is possible to produce crowns for 7 different patients all at once. Thanks to the smaller blank shape, it is no longer necessary to keep a large inventory of hardly used colours. For the Multi Blank Holder, 1-size material blanks are available in Prettau® Dispersive® zirconia in the heights of 16 mm and 22 mm.
 
 

 
  PRETTAU® 2 Dispersive® 
Particularly high translucent and flexural strenght zirconia with natural colour gradient. Suitable for single crowns (monolithic or reduced restorations for ceramic layering).
     
  PRETTAU® 3 Dispersive® 
Zirconia with particularly high translucency, flexural strength and Gradual-Triplex-Technology: a triple gradient of natural colour, flexural strength and translucency. Suitable for single crowns (monolithic or reduced restorations for ceramic layering).



Easy to use


 
 

Instructions


    Instruction
Multi Blank Holder 4x1
         
    Instruction
Multi Blank Holder 7x1 Teleskoper
 


 

Multi Blank Holder


 
Nowosc! Set Multi Blank Holder 4x1
Holder for fixing and for the serial processing of up to four size 1 material blanks in the Zirkonzahn milling unit with orbit ⌀ 95 mm.

Zawartość: 1x holder for up to four size 1 material blanks with a height of 16 mm, 1x attachment disk to heighten the holder for the size 1 material blanks with a height of 22 mm, 
4x fixing screws, 1x rotating spanner for tightening the fixing screws

Numer katalogowy:  ZBAC2860
  Nowosc! Set Multi Blank Holder 7x1 Teleskoper
Holder for fixing and for the serial processing of up to seven size 1 material blanks in the Zirkonzahn milling unit with orbit  ⌀ 125 mm.

Zawartość: 1x holder for up to seven size 1 material blanks with a height of 16 mm, 1x attachment disk to heighten the holder for the size 1 material blanks with a height of 22 mm, 7x fixing screws, 1x rotating spanner for tightening the fixing screws 

Numer katalogowy:  ZBAC2880