Geometric adaptation of the bar to a temporary restoration
NOWOSCDesign of delicate restorations despite unfavourably placed implants
NOWOSCOrder implant components directly in the Zirkonzahn.Modellier software
With the new version of the Zirkonzahn.Modellier you can order the implant components you need directly in the CAD/CAM software.
Importing external data into the Zirkonzahn Software
Did you already know that you can easily import and export files from third-party or intraoral scanners into/from the Zirkonzahn software?
Blank registration in the nesting software via webcam
With the easy blank registration via webcam, any error which may occur during the manual blank registration, can be avoided.
Software.Tipps – Hotkeys
Overview of all hotkeys
Titanium Base Extractor
Removal of titanium bases from lab analogues or implants with the aid of the Titanium Base Extractor.
Natural aesthetics thanks to gold-plated sinter metal structures
Gold-plated substructures made from sinter metal can give restorations a warm natural colour.
This is the reason why we recommend gold plating sinter metal substructures after milling, refining by hand, sintering, polishing and high gloss polishing. Using electroplating techniques, you can carry out such procedures in your own lab. In this way, zirconia secondary structures gain a natural appearance without grey value.
Remove residual zirconia from the screw channel
When milling occlusally screwed zirconia bridges, there might be residual zirconia in the screw channel, which is pressed against the walls of the screw channel during the milling process and which can affect the milling result. This is why we recommend to clean the screw channel with a special brush.
Higher accuracy during articulation thanks to the Fine Adjustment function
Achieving higher accuracy by the additional use of the "Fine Adjustment" function.
Modelling of partial telescopes
With the help of the Zirkozahn software, you can model partial telescopes with attachments.
How to make a dowel without the aid of the model
“Impression-Scan” in the Zirkonzahn software as a temporary solution.
Subsequent substitution of scans in the mock up software
In the Zirkonzahn mock-up software Zirkonzahn.Modellier, you can also exchange
scans subsequently.
Placement of sintering stabilizers
Place stabilizers in a precise way to avoid warpage of your restoration in the sintering furnace.
Mock-Up Support Easy-Fix-System
With the Easy-Fix Model Holder, fixing of models becomes as easy as child's play!
Possible reasons for discolorations on the zirconia restauration and how to prevent them
Possible reasons for discolourations on the zirconia restorations and how to prevent them.
Scanning and free assignment of individual dies
Enormous time-savings by using the Multi-Die Holder.
Bite Splints made from Temp Premium Flexible in functional therapy
A worthwhile alternative to traditionally used materials.
Zirconia abutments on titanium bases
Reduce the force impact on the titanium structure compared to directly screwed structures.
Combination of virtual tooth forms and natural tooth substance
Make full use of the potential of the intelligent and natural tooth library Heroes Collection.
Colouring titanium jewellery
The Titanium Spectral Colouring Anodizer allows you to anodize more than just titanium
structures in different colours ...
DEPOSIT 2D-PHOTOS FOR YOUR PATIENT CASES
In order to receive face physiognomic reference points during the modelling, you can also
deposit photos of the patient in the software.
SKAN ODNIESIENIA GŁÓWNEGO MODELU
With this scan trick, you can exclude possible imprecisions and capture also the gingival parts.
THE LONGER THE PRE-DRYING TIME, THE BETTER ...
Match the pre-drying time with the stand-by temperature.
BRAK ODPRYSKÓW CERAMIKI DZIĘKI OCHRONIE KRAWĘDZI SIECZNYCH
No more ceramic chipping thanks to incisal edge protection.
