NOWOSCFrezarka M6 Teleskoper Blank Changer 





INNOVATION AND PROGRESS – OUR DRIVING FORCES
  In an increasingly fast moving world, where time is one of our most precious resources, it becomes more important than ever to keep an open mind and explore new paths. We are constantly looking for new solutions to do things better. With our innovations, we want to automate processes, speed up procedures and increase the dental workflow productivity so that our customers can focus on fundamental things – their craftsmanship. With our new M6 milling unit, we have met these requirements.





OVERVIEW OF THE CHARACTERISTICS
  Large blank storage
Despite its compactness, the blank storage of the M6 milling unit offers space for up to 16 or 80 blanks (upgradeable). Via the separate pull-out blank storage, blanks can be inserted manually or by means of the full-automatic Blank Changer. Furthermore, a camera recognises the material blanks via QR code so that the blanks can be intelligently sorted. Using a calibration block (included in the scope of delivery), the blank storage can perform a self-measurement and recalibrate itself in case of any deviations.
     
  Full-automatic Blank Changer
The 5+1-axis simultaneous milling unit is equipped with a Blank Changer which automatically transfers the material blanks from the storage to the orbit and places them back in the storage once the milling process is complete. This means that restorations can be now produced fully automatically without any manual intermediate steps, using several dental materials in different colours and heights.
     
  Full control
The Blank Changer has an integrated ToF (Time of Flight) sensor, which monitors the blank presence as well as the slots in the storage. In addition, each slot is equipped with a LED status display. The different colours indicate to the user whether an action is necessary (e.g. loading and unloading of blanks, incorrectly loaded blanks, etc.).
     
  Teleskoper Orbit SelfLock
We also remained true to the proven “Teleskoper” philosophy. With the Teleskoper Orbit SelfLock (Ø 125 mm) material blanks with a diameter of 95, 98, 106 and 125 mm can be now fixed and processed fully automatically. In particular, the Ø 125 mm blanks have been designed in such a way that they can be inserted and milled without any additional blank holder.
     
  Performance Spindle
Our M6 milling units are equipped by default with the new Performance Spindle. Thanks to a specially developed Permanent Magnet Synchronous Motor (PMSM) is optimally adapted to the milling unit, this spindle can reach a maximum torque of 200 Ncm at speeds of 6.000 to 40.000 rpm with a peak power of 2.5 kW.
     
  Up to 60 working slots
The M6 milling unit is equipped with a contamination-protected tool chamber which is separate from the milling chamber and features an automatic tool changer function. With space for up to two storages with 30 slots each, up to 60 milling tools can be stored in a safely and orderly manner. Before and after milling tools are automatically checked for type or damage.
     
  Autonomous subtractive production
Once the blank storage has been loaded and the milling files prepared and transferred to the machine, the M6 works autonomously thanks to the full-automatic Blank Changer. Thanks to the automatic self-cleaning and drying function, the Cleaning kit for manual cleaning and the Ioniser, which electrostatically discharges resin shavings, dirty milling chambers belong to the past.
     
  Easy access for maintenance
The M6 has been equipped with a newly developed swing door which allows fast, uncomplicated and autonomous maintenance through frontal access. This means there is no need, for example, to remove covers or panels to carry out maintenance on ball screws or recirculating ball bearing, saving a lot of time. In addition, a regular maintenance of the machine parts increases their durability.


 

Download


Insert M6 Blank Changer


 

TECHNICAL DATA


 
Weight 220 kg (180 kg milling unit + 40 kg blank storage)

Width 109 cm (+ 14 cm Cleaning Kit)

Height 69 cm

Depth 62 cm (plus connection for suction system)

Casing with hardened Securit glass ISO 12150

Electrical power 2000 W

Operating voltage 100 – 240 V~; 50 – 60 Hz

Milling unit processing axes 5+1

Blank Changer processing axes 2+2

Tool changer Automatic, 60x

Number of tools 60 (2 storages with 30 slots)

Milling spindle Performance Spindle with Permanent Magnet Synchronous Motor (PMSM): 6.000 - 40,000 rpm

Milling spindle power max. 2,5 kW

Milling spindle torque 20 Ncm constant - 200 Ncm maximum

Blank storage 16 or 80 blanks (upgradeable)

Blank management Automated blank management with optical blank detection

Material blanks Ø 95 mm, Ø 98 mm, Ø 106 mm, Ø 125 mm

Milling angle A/B axis ± 30°

Bur/chuck diameter Ø 6 mm

Bur length Up to 60 mm

Measurement accuracy ± 0,001 mm (1 μ)

Tool damage detection Automatic

Compressed air Input 6.5-9 bar, 160l/min at 6.5 bar, max. 400l/min (chamber cleaning)

Motors Brushless with encoder (dual encoder in x axis)

Noise level < 60 dB

Linear axis resolution ± 0,001 mm (1 μ)

Rotation axis resolution ± 0,00045° = ± 0,00000785 rad

Tool management Automatic

Suction system (external) Integrated power output up to 2000 W, built-in control relay for external devices


ZIRKONZAHN.CAM HIGH-SPEED


 

High-speed milling path calculation and milling

With the new Zirkonzahn.CAM High-Speed software, we have not only reduced calculation and nesting times but also milling times for dental structures made from soft materials. For example, a complete upper and lower prosthesis (denture bases and teeth) can be milled in approx. 2 hours and 40 minutes. 

  
 
Accessories


  Blank Holder Teleskoper Ø95 – Teleskoper Orbit SelfLock
Metal holder for fixing hard and soft material blanks with diameter of 95 mm. The Blank Holder enables the Teleskoper functions, including friction adjustment, Double Milling, and Stop & Go.

Numer katalogowy: ZBAC4401
  Blank Holder Teleskoper Ø98 – Teleskoper Orbit SelfLock
Metal holder for fixing hard and soft material blanks with diameter of 98 mm. The Blank Holder enables the Teleskoper functions, including friction adjustment, Double Milling, and Stop & Go.

Numer katalogowy: ZBAC4411
  Blank Holder Teleskoper Ø106 – Teleskoper Orbit SelfLock
Metal holder for fixing hard and soft material blanks with diameter of 106 mm. The Blank Holder enables the Teleskoper functions, including friction adjustment, Double Milling, and Stop & Go.

Numer katalogowy: ZBAC4415
  Blank Holder Teleskoper Ø95 Soft – Teleskoper Orbit SelfLock
Plastic holder for fixing soft material blanks (e.g. zirconia, resin, sinter metal) with diameter of 95 mm.

Numer katalogowy: ZBAC4421
  Blank Holder Teleskoper Ø98 Soft – Teleskoper Orbit SelfLock
Plastic holder for fixing soft material blanks (e.g. zirconia, resin, sinter metal) with diameter of 98 mm.

Numer katalogowy: ZBAC4422
  Glass Ceramics Holder 6 – Teleskoper Orbit SelfLock
Holder for fixing and serial processing up to six glass-ceramic blanks.

Numer katalogowy: ZBAC4431
  Set Multi Blank Holder 6x1 – Teleskoper Orbit SelfLock
Holder for fixing and serial processing up to six mini blanks (size 1) in Prettau® Dispersive® zirconia (1H16, 1H22). 

Numer katalogowy: ZBAC4460
  Raw/Glass Combi-Holder 4/3 – Teleskoper Orbit SelfLock
Holder for fixing and serial processing up to four prefabricated titanium abutment blanks (Raw-Abutments®), as well as up to three glass-ceramic blanks. 

Numer katalogowy: ZBAC4451
  Set filter bags 350 x 400 mm  (5 pieces)
Bags for collecting milling chips and filtering the coolant in the Milling Bucket for easy disposal.

Numer katalogowy: ZBAC9074
 
    TOOL MAGAZINE M6
Tool magazine with up to 30 slots for storing milling burs.
 
 
ZBAC4461 – Front M6 ZIRCONIA tool magazine (white, included)
ZBAC4462 – Rear M6 ZIRCONIA tool magazine (white)
     
 
ZBAC4463 – Front M6 PMMA tool magazine (yellow)
ZBAC4464 – Rear M6 PMMA tool magazine (yellow)
     
 
ZBAC4465 – Front M6 WAX tool magazine (green)
ZBAC4466 – Rear M6 WAX tool magazine (green)
     
 
ZBAC4467 – Front M6 SINTER METAL tool magazine (black) 
ZBAC4468 – Rear M6 SINTER METAL tool magazine (black)
     
 
ZBAC4469 – Front M6 CrCo tool magazine (blue)
ZBAC4470 – Rear M6 CrCo tool magazine (blue) 
     
 
ZBAC4471 – Front M6 TITAN tool magazine (grey)
ZBAC4472 – Rear M6 TITAN tool magazine (grey)
     
 
ZBAC4473 – Front M6 GLASS tool magazine (red)
ZBAC4474 – Rear M6 GLASS tool magazine (red)

OBRABIANE MATERIAŁY 


 
 Cyrkon  Żywica  Wosk  Drewno  Metal syntery
zowany
 Chrome-
 Cobalt
Tytan  Raw-
 Abutment®
 Ceramika szklana  Composite

Download


Insert M6 Blank Changer
Brochure M6 Blank Changer


 

TECHNICAL DATA


 
Weight 220 kg (180 kg milling unit + 40 kg blank storage)

Width 109 cm (+ 14 cm Cleaning Kit)

Height 69 cm

Depth 62 cm (plus connection for suction system)

Casing with hardened Securit glass ISO 12150

Electrical power 2000 W

Operating voltage 100 – 240 V~; 50 – 60 Hz

Milling unit processing axes 5+1

Blank Changer processing axes 2+2

Tool changer Automatic, 60x

Number of tools 60 (2 storages with 30 slots)

Milling spindle Performance Spindle with Permanent Magnet Synchronous Motor (PMSM): 6.000 - 40,000 rpm

Milling spindle power max. 2,5 kW

Milling spindle torque 20 N·cm constant – 200 N·cm maximum

Blank storage upgradable from 16 to 80 blanks

Blank management Automated blank management with optical blank detection

Material blanks Ø 95 mm, Ø 98 mm, Ø 106 mm, Ø 125 mm

Milling angle A/B axis ± 30°

Bur/chuck diameter Ø 6 mm

Bur length Up to 60 mm

Measurement accuracy ± 0,001 mm (1 μ)

Tool damage detection Automatic

Compressed air Input 6.5-9 bar, 160l/min at 6.5 bar, max. 400l/min (chamber cleaning)

Motors Brushless with encoder (dual encoder in x axis)

Noise level < 60 dB

Linear axis resolution ± 0,001 mm (1 μ)

Rotation axis resolution ± 0,00045° = ± 0,00000785 rad

Tool management Automatic

Suction system (external) Integrated power output up to 2000 W, built-in control relay for external devices