BAZY TYTANOWE I AKCESORIA DLA PODPÓR CYRKONOWYCH PRODUKOWANYCH INDYWIDUALNIE
The use of titanium bases reduces the effect of transverse forces on the restoration, in contrast to restorations screwed directly on the implant. We generally recommend the use of titanium bases for all screw-retained implant structures, particularly though for those in the anterior tooth region.
TITANIUM BASES IN 5 HEIGHTS ...
Except for the Narrow titanium bases, the Zirkonzahn titanium bases are available in up to five different platform heights, in order to bring the implant to the desired gingival level. Due to their narrow geometry, the Narrow titanium bases are particularly suitable for use in the anterior tooth sector.
... GOLD-PLATED AND ANODISED
All Zirkonzahn titanium bases are available with a high quality gold plating. The gold coating increases the biocompatibility and the golden shade reduces the grey value of the entire restoration.
Moreover, the titanium bases can also be anodised in different colours using the Zirkonzahn Titanium Spectral-Colouring Anodizer or the Metal Colourizer. The high biocompatibility of the material remains unchanged.
Conical cemented titanium bases non hex
Parallel cemented titanium bases hex
Narrow titanium base non hex
Conical cemented titanium bases non hex K85
Parallel cemented titanium bases hex K85
Conical cemented titanium bases non hex K80 Angled Screw Channel (ASC)
Parallel cemented titanium bases hex K80 Angled Screw Channel (ASC)
Abutment screw integral zirconia
Narrow titanium base
The Narrow Titanium Bases are especially advantageous for implants on bone level, since their platform diameter is minimised. This helps to prevent bone atrophy. Thanks to their reduced gingiva height, their metal structure is not visible under the restoration, even if the gingival level is very low or in case of gingival atrophy. They are especially suitable for implants placed closely, e.g. in the lower anterior sector where little space is available.
NOWOSCTitanium Base K85
The Titanium Bases K85 can be shortened individually and thus optimally adapted to the respective tooth length. This ensures optimum force distribution and stabilises the whole structure. Depending on the intended use, the titanium bases are available with or without anti-rotation device.
NOWOSCTitanium Base K80 Angled Screw Channel (ASC)
The Titanium Bases K80 Angled Screw Channel combine two advantages in one product. On the one hand, the shaft height can be shortened individually and thus be adapted to the tooth height. On the other hand, the angled screw access channel compensates for non-optimal implant positions. The access channel can be moved at an angle of 0°-30°. The titanium bases are screwed onto the implant using the Ball Head screwdriver, the Ratched Wrench torque wrench and a special adapter.
Minimum requirements: Zirkonzahn.Modellier software version 9064.
Śruby do łączników lub łączników cyrkonowych
This abutment screw with flat screw head is ideal for directly screwed zirconia or resin structures. However, we generally recommend the use of titanium bases for all implant-supported restorations.
||For individual abutments made from zirconia and resin
||With flat screw head
||Available gold-plated for increased biocompatibility; gold‑plating prevents cold welding as well as the unintended loosening of the screw
||Abutment Screw Black: Screw for the final restoration in the patient’s mouth
||Abutment Screw Laboratory: Provisional screw for fixing the structure on the model
Titanium bases, Raw‑Abutments®
and Scanmarkers can be fixed onto the implant using the Abutment Screw Metal. On full-contour zirconia abutments, screws with flat seating must be used, in order to avoid tensions in the zirconia which, in the worst case, can lead to cracks in the abutment.